Calculation No.                                                                                      
                         
CALCULATION SHEET Project No.            
          onlinestructuraldesign.com        
Project:   Calc. By Date Rev.        
                         
Subject:   Checked By Date          
               
                             
Input  Output                  
Beam characteristics Shears, Moments and Deflections                  
Beam loads                    
                               
Beam characteristics     No. of Load Cases
               
L = ft beam length                      
I = in4 moment of inertia                      
E = ksi element elasticity modulus                    
                               
Load Case
                   
w = kip/ft             uniformly distributed load        
P1 = kip a= ft b= ft concentrated load        
P2 = kip a= ft b= ft concentrated load        
Load Case
                   
w = kip/ft             uniformly distributed load        
P1 = kip a= ft b= ft concentrated load        
P2 = kip a= ft b= ft concentrated load        
Load Case
                   
w = kip/ft             uniformly distributed load        
P1 = kip a= ft b= ft concentrated load        
P2 = kip a= ft b= ft concentrated load        
                         
Load Combinations (Load Factors)                          
For Bending Moments and Shear Force Calculation For Deflection Calculation                
                   
                   
                   
Position for internal forces and deflection calculations                      
x = ft                          
         
                 
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
                               
Maximum moment and shear      
                 
Mmax = kip*ft                          
Vmax = kip                          
Maximum deflection                          
Dmax = in                          
Reactions                          
R1 = kip   M1 = kip*ft                      
R2 = kip   M2 = kip*ft                      
                               
                       
Mx = kip*ft                          
Vx = kip                          
                       
Dx = in                          
                   
                   
                   
                   
                               
                               
  Reactions       1 UDL  
      R1 R2 M1 M2   2 UDL + 1 concentrated load  
            3 UDL + 2 concentrated loads  
          1 concentrated load  
          2 concentrated loads  
       
         
       
       
       
         
       
       
       
           
      Bending    
    x (%) 0 0.02 0.04 0.06 0.08 0.1 0.12 0.14 0.16 0.18 0.2 0.22 0.24 0.26 0.28 0.3 0.32 0.34 0.36 0.38 0.4 0.42 0.44 0.46 0.48 0.5 0.52 0.54 0.56 0.58 0.6 0.62 0.64 0.66 0.68 0.7 0.72 0.74 0.76 0.78 0.8 0.82 0.84 0.86 0.88 0.9 0.92 0.94 0.96 0.98 1
    x (ft) 0 0.18 0.36 0.54 0.72 0.9 1.08 1.26 1.44 1.62 1.8 1.98 2.16 2.34 2.52 2.7 2.88 3.06 3.24 3.42 3.6 3.78 3.96 4.14 4.32 4.5 4.68 4.86 5.04 5.22 5.4 5.58 5.76 5.94 6.12 6.3 6.48 6.66 6.84 7.02 7.2 7.38 7.56 7.74 7.92 8.1 8.28 8.46 8.64 8.82 9
ULS      
  UDL
  P1
  P2
       
  UDL
  P1
  P2
       
  UDL
  P1
  P2
    Total -38.8 -34.1 -29.4 -24.9 -20.5 -16.3 -12.1 -8.1 -4.1 -0.3 3.4 7.0 8.5 9.7 10.8 11.7 12.5 13.3 13.9 14.4 14.7 15.0 15.1 15.1 15.0 14.8 14.5 14.0 13.5 12.8 12.0 11.1 10.1 8.9 7.6 6.3 4.8 3.1 1.4 -0.4 -2.4 -4.5 -6.7 -9.0 -11.4 -14.0 -16.6 -19.4 -22.3 -25.3 -28.4
       
      Shear  
ULS      
  UDL
  P1
  P2
       
  UDL
  P1
  P2
       
  UDL
  P1
  P2
    Total 26.7 26.0 25.4 24.7 24.1 23.4 22.8 22.1 21.5 20.9 20.2 19.6 6.9 6.3 5.6 5.0 4.3 3.7 3.0 2.4 1.7 1.1 0.4 -0.2 -0.9 -1.5 -2.2 -2.8 -3.5 -4.1 -4.8 -5.4 -6.1 -6.7 -7.3 -8.0 -8.6 -9.3 -9.9 -10.6 -11.2 -11.9 -12.5 -13.2 -13.8 -14.5 -15.1 -15.8 -16.4 -17.1 -17.7
                                                                                                           
      Deflection  
SLS      
  UDL
  P1
  P2
       
  UDL
  P1
  P2
       
  UDL
  P1
  P2
    Total 0.000 0.001 0.006 0.012 0.021 0.031 0.043 0.055 0.069 #### #### 0.109 0.122 0.134 0.145 0.155 0.165 0.173 0.181 0.187 0.192 0.196 0.199 0.200 0.201 0.200 0.198 0.195 0.190 0.185 0.178 0.171 0.162 0.153 0.143 0.133 0.122 0.111 0.099 0.087 0.076 0.064 0.053 0.042 0.032 0.024 0.016 0.009 0.004 0.001 0.000